To Next PageTo Next Page
Need help?Do you have a question about the Lennox LIAH024-200U432 and is the answer not in the manual?
General| Model Number | LIAH024-200U432 |
|---|---|
| Product Type | Air Handler |
| Cooling Capacity (BTU/h) | 24, 000 |
| Cooling Capacity (tons) | 2 |
| Heating Capacity (BTU/h) | 24, 000 |
| Heating Capacity (tons) | 2 |
| Voltage | 208/230 |
| Phase | 1 |
| Frequency (Hz) | 60 |
| Motor Type | ECM |
| Airflow (CFM) | 800 |
| Width (in) | 21 |
| Depth (in) | 21 |
| Refrigerant | R-410A |
Covers general warnings, safety alert symbols, and definitions of DANGER, WARNING, CAUTION, NOTICE.
Details electrical shock hazards, EPA refrigerant regulations, and environmental concerns.
Specific warnings about installing units in enclosed areas with CO-producing devices.
Overview of the air handler's features, quality, efficiency, and refrigerant type.
Lists and illustrates optional accessories like throw-over pipes for connections.
Provides diagrams and measurements (W, D, H, A, B) for various models.
Identifies key components of the air handler with a diagram.
Details cooling capacity, optional heaters, motor specs, and filter size.
Guidance on checking the product, reading instructions, and gathering tools.
Emphasizes recognizing and complying with safety symbols and labels.
Instructions to check for shipping damage and verify model numbers.
Guidelines for choosing an indoor installation location and required clearances.
Details on connection pipe specifications and preparation steps.
Proper methods for connecting and installing condensate drain pipes and traps.
Requirements for supply and return ductwork, and return air filters.
Information on available electric heater kits and their installation procedures.
Requirements and notices for professional electrical installation.
A checklist of critical items to verify after installation.
Preparations and steps for conducting a trial run of the unit.
Lists common issues, their causes, and recommended solutions.
Regular checks for drain pipe clogs to ensure smooth condensate drainage.
Pre-seasonal checks for unit inlet/outlet, grounding, filter, and installation firmness.
Steps for maintenance after seasonal use, including power cutoff and cleaning.
Guidance on purchasing replacement parts from authorized sources.
Details the conditions that must be met for the unit's warranty to remain valid.
