73
Installation and Maintenance
Service Manual
panel
grille
ProcedureSteps
right side plate
axial flow blade
4.Remove grille
5. Remove panel
6. Remove right side plate
7. Remove axial flow blade
Remove connection screws between the
front grille and the front panel. Then remove
the front grille.
Remove connection screws connecting the
front panel with the chassis and the motor
support, and then remove the front panel.
Remove connection screws connecting the
right side plate with the valve support and the
electric box. Then remove the right side
plate.
Remove the nut fixing the blade and then
remove the axial flow blade.
To Next Page
Loading...