74
Installation and Maintenance
Service Manual
motor support
motor
electric box assy
ProcedureSteps
isolation sheet
soundproof sponge
8. Remove motor and motor support
9.Remove electric box assy
10.Remove isolation sheet
11. Remove soundproof sponge
Remove tapping screws fixing the motor and
disconnect the leading wire insert of the
motor. Then remove the motor.
Remove tapping screws fixing the motor and
lift the motor support to remove it.
Remove screws fixing the electric box assy;
loosen the wire bundle and unplug the wiring
terminals. Then lift the electric box to removeit.
Remove soundproof sponge wrapping the
compressor.
Remove the screws fixing the isolation
sheet and then remove the isolation sheet.
To Next Page
Loading...