Lennox LNIV2610 User Manual

OWNER’S MANUAL
FOR THE
AIR CONDITIONER
REMOTE CONTROLLER
Before using your air conditioner, please
read this manual carefully and keep it for
future reference.
Australia 13 23 50 New Zealand 0800 653 330
Web www.lennoxaus.com.au
NOTE:
This remote controller will only function
with the following Lennox inverter models –
LNIV2610
LNIV3510
LNIV5010
LNIV6510
Read this manual
Inside you will fi nd many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventative care on your part can save you a great deal
of time and money over the life of your air conditioner.
You’ll fi nd many answers to common problems in the
chart of troubleshooting tips. If you review the chart of
Troubleshooting Tips fi rst, you may not need to call for
service.
Congratulations on your purchase
of a Lennox air conditioner
E963_Lennox AC Remote Controller 16pp A5_3.indd 16-1E963_Lennox AC Remote Controller 16pp A5_3.indd 16-1 23/01/12 9:27 AM23/01/12 9:27 AM

Lennox LNIV2610 Specifications

General

Brand	Lennox
Model	LNIV2610
Category	Air Conditioner
Language	English

Summary

Handling the Remote Controller

Location of the Remote Controller

Specifies the operational range and direction for the remote, noting obstructions.

Replacing Batteries

Provides instructions and cautions for replacing the remote's batteries.

Remote Controller Specifications

Performance Features

Function Buttons

Indicators on LCD

Transmission Indicator

Lights up when the remote transmits signals to the indoor unit.

Mode Display

Shows the current operation mode like AUTO, COOL, DRY, HEAT, and FAN.

Temp./Timer Display

Displays the set temperature or ON/OFF timer settings.

Fan Speed Display

Indicates the selected fan speed: AUTO, LOW, MED, or HIGH.

ON/OFF Display

Indicates when the unit is powered on.

Lock Display

Shown when the remote control's lock mode is activated.

FOLLOW ME Display

Indicates when the FOLLOW ME function is active.

Sleep Display

Shown when the SLEEP function is active.

How to Use the Buttons

Auto Operation

Steps to initiate and set the auto operation mode.

Cooling/Heating/Fan Operation

Instructions for selecting cooling, heating, or fan modes.

Dehumidifying Operation

Procedure for operating the air conditioner in DRY mode.

Adjusting Air Flow Direction

Guide on using SWING and DIRECT buttons for airflow control.

Timer Operation

Sleep / Fresh Function

LED / Follow Me Function

Turbo / Self-Clean Function