GUIDE SPECIFICATIONS
TS 6 to 12.5 Ton R−410A Air Conditioners / Page 32
2.02 PRODUCT SUBSTITUTIONS
A. Substitutions: No substitutions permitted.
PART 3 EXECUTION
3.01 MANUFACTURER’S INSTRUCTIONS
Specifier Note: Revise article below to suit project requirements and specifier’s practice.
A. Compliance: Comply with manufacturer’s written data, including product technical bulletins, product catalog
installation instructions and product carton installation instructions.
3.02 EXAMINATION
A. Site Verification of Conditions: Verify substrate conditions, which have been previously installed under other
sections, are acceptable for product installation in accordance with manufacturer’s instructions.
3.03 INSTALLATION
A. Install Condensing Units in accordance with manufacturers instructions and regulations of authorities having
jurisdiction.
END OF SECTION
To Next Page
Loading...