Lennox XP17 - Page 40

XP17 - 2 to 5 Ton Heat Pump / Page 40
AHRI SYSTEM MATCHES
Model No.
Cooling
Capacity
SEER EER
Heat Capacity Heat COP
HSPF
(IV)
Coil or
Air Handler
Furnace
AHRI
Reference
High Low High Low
XP17-060-230 56,000 14.70 12.20 51,500 35,800 3.30 2.42 8.70 CX34-62C ML180UH090E60C 4666927
XP17-060-230 56,000 14.70 12.00 51,500 35,800 3.28 2.40 8.70 CX34-62C ML180UH110E60C 4666928
XP17-060-230 56,000 14.70 12.00 51,500 35,800 3.28 2.40 8.70 CX34-62C ML180UH110XE60C 4672134
XP17-060-230 56,000 14.70 12.20 51,500 35,800 3.30 2.40 8.70 CX34-62C SL280UH090V60C 3894879
XP17-060-230 56,000 14.70 12.20 51,500 35,800 3.30 2.40 8.70 CX34-62C SL280UH090XV60C 4235881
XP17-060-230 56,000 14.70 12.20 51,500 35,800 3.28 2.40 8.70 CX34-62C SL280UH110V60C 3894880
XP17-060-230 56,000 14.70 12.20 51,500 35,800 3.28 2.40 8.70 CX34-62C SL280UH110XV60C 4042039
XP17-060-230 55,500 14.50 12.00 51,500 35,800 3.24 2.38 8.50 CX34-62C SLP98UH090XV60C 5137377
XP17-060-230 55,500 14.70 12.20 51,000 35,600 3.22 2.38 8.50 CX34-62C SLP98UH110XV60C 5137378
XP17-060-230 56,500 14.20 12.00 52,000 36,200 3.28 2.38 8.50 CX34-62C 3840336
XP17-060-230 56,000 14.20 12.00 51,000 36,200 3.26 2.40 8.50 CX34-62D EL195UH135XE60D 4693671
XP17-060-230 56,000 14.70 12.20 51,000 35,800 3.24 2.40 8.50 CX34-62D EL296UH135XV60D 5054841
XP17-060-230 56,000 14.70 12.00 51,500 35,800 3.28 2.42 8.70 CX34-62D ML180UH135E60D 4666929
XP17-060-230 56,000 15.00 12.50 51,000 35,400 3.30 2.44 8.70 CX34-62D SL280UH135V60D 3894881
XP17-060-230 56,000 14.70 12.20 51,000 35,800 3.24 2.40 8.50 CX34-62D SLP98UH135XV60D 5136951
XP17-060-230 56,000 14.20 11.70 52,000 36,200 3.22 2.36 8.50 CX34-62D 3840345
NOTES:
Ratings are AHRI certied to AHRI Standard 210/240 (with 25 ft. of connecting refrigerant lines);
• Cooling Ratings - 95°F outdoor air temperature and 80 °F db/67° F wb entering indoor coil air.
• High Temperature Heating Ratings - 47° F db/43° F wb outdoor air temperature and 70 °F db entering indoor coil air.
• Low Temperature Heating Ratings - 17 °F db/15° F wb outdoor air temperature and 70 °F db entering indoor coil air.
All ratings include the use of a blower time delay relay (TDR). All Lennox variable-speed Furnaces and Air Handlers have time delay capabilities. Other Furnaces and Air
Handlers may require an optional time delay relay (58M81) for eld installation. See furnace or air handler specications to determine if relay is needed.
Also see TXV Substitution Table at the beginning of the Heat Pump AHRI System Matches section.
When used with gas furnaces, a dual-fuel control, a control system with dual-fuel capabilities (LZP-2 or LZP-4), or a thermostat with dual-fuel capabilities must be used
(order separately).
To convert HSPF from Region IV to Region V - Divide by 1.15.