24
Chapter 2. Learning the basics
Inserting a memory card
1
Push the dummy card until you hear a click. Gently pull the dummy
card out of the memory card slot.
2
Push the card directly into the memory card slot until it reaches the
end.
Removing a memory card
1
Push the memory card until you hear a click. Gently pull the memory
card out of the memory card slot.
2
Insert the dummy card to the memory card slot.
Connecting an ExpressCard device
Your computer comes with an ExpressCard/34 slot used for connecting
ExpressCard devices.
Note: The dummy card is used for preventing dust and small particles from
entering the inside of your computer when the memory card slot is not in use.
Retain the dummy card for future use.
Note: Before removing the memory card, unable it by Windows Safely Remove
Hardware utility to avoid data corruption.
Note: Only use the ExpressCard/34 devices.
To Next Page