EasyManua.ls Logo

Lenovo Moto Z4 User Manual

Lenovo Moto Z4
171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Lenovo Confidential Restricted:
PAGE 1 Do not share without consent from Lenovo
Lenovo Moto Z4
Lenovo Moto Z4
Level 2 Service and Repair Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lenovo Moto Z4 and is the answer not in the manual?

Lenovo Moto Z4 Specifications

General IconGeneral
ProcessorQualcomm Snapdragon 675
RAM4 GB
Storage128 GB
Battery3600 mAh
Operating SystemAndroid 9.0 (Pie)
Weight165 g
Display6.4 inches
Rear Camera48 MP
Front Camera25 MP
Dimensions158 x 75 x 7.4 mm
Connectivity4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0
Fingerprint SensorUnder display

Summary

Safety Information

Cautions and Warnings

Important notes and warnings to prevent damage or injury during device handling.

Battery Safety Guidelines

Specific precautions for handling and charging the device battery safely.

Soldering Safety Guidelines

Safety protocols for performing soldering operations on electronic components.

Introduction

External Views

Identification of external device components and their locations.

Exploded Views

Disassembly and Recovery

Disassembly and Recovery Map

A visual guide illustrating the sequence of component disassembly.

Tools Required for Disassembly

List of specialized tools needed for device disassembly.

SIM/SD Tray Removal

Procedure to remove the SIM/SD card tray from the device.

Display Removal

Step-by-step guide to safely remove the device display.

Battery Removal

Instructions for safely removing the device battery.

Main PCB Removal

Procedure for removing the main printed circuit board (PCB).

Fingerprint Sensor (FPS) Removal

Steps to remove the fingerprint sensor module.

Top Carrier Removal

Guide to remove the top carrier component.

Rear-Facing Imager Removal

Steps to remove the rear-facing camera module.

Parts Refresh

Tools Required for Parts Refresh

List of tools needed for parts refresh procedures.

PCB Cleaning

Steps for cleaning the printed circuit board (PCB).

Front Housing Cleaning

Instructions for cleaning the front housing.

Rear Housing Cleaning

Instructions for cleaning the rear housing.

Display Cleaning

Steps for cleaning the device display.

Assembly

Assembly Map

A visual diagram showing the assembly sequence of device components.

Tools Required for Assembly

List of specialized tools required for device assembly.

Rear Inlay Assembly

Step-by-step guide for assembling the rear inlay.

Display Assembly

Detailed instructions for assembling and attaching the device display.

Main PCB Assembly

Procedure for installing the main printed circuit board (PCB).

Battery Assembly

Instructions for installing the device battery.

Related product manuals