Need help?Do you have a question about the Lenovo RT1.5kVA and is the answer not in the manual?
General| Capacity | 1.5 kVA |
|---|---|
| Output Frequency | 50/60 Hz |
| Form Factor | Tower |
| Topology | Line Interactive |
| Transfer Time | 4-8 ms |
| Communication Interface | USB |
| Operating Temperature | 0 - 40 °C |
| Capacity (Watts) | 1350 Watts |
| Output Voltage | 220-240 VAC |
| Battery Type | Sealed Lead Acid |
Guide to identifying potential unsafe conditions in Lenovo products.
Safe servicing practices for electrical equipment, including tool use and precautions.
Steps for unpacking and verifying contents for 100V/120V UPS models.
Steps for unpacking and verifying contents for 200V/230V UPS models.
Instructions for connecting the internal battery pack before UPS startup.
Procedures for installing the UPS in a rack using rails.
Procedures for installing the UPS as a tower unit.
Connecting the UPS to AC power and loads for AX models.
Connecting the UPS to AC power and loads for KX models.
Guide to unpacking, rack, and tower installation of Extended Battery Modules.
Steps to start the UPS and verify normal operating status.
Procedure to start the UPS using battery power when utility power is unavailable.
Instructions for safely shutting down the UPS unit.
Details on UPS behavior during battery power, including low-battery warnings.
Procedure for replacing UPS battery packs when indicated.
Essential safety precautions when working with battery components.
Detailed steps for removing old and installing new battery packs.
How to check and interpret logged events and faults in the UPS.
Table detailing common UPS conditions, their causes, and recommended actions.
To Next Page
