Step 5. Place the flash power module in the slot on the air baffle with the cable at the bottom.
Air baffle
Standard I/O book
Flash power
module slots
Flash power
module
Step 6. If you install the flash power modules in the two slots on the left side (facing the front of the
standard I/O book) of the air baffle, route the cables through the clips and the holes on the side of
the air baffle, as shown in the following illustration. When you install a flash power module in the
slot on the right side of the air baffle, route the cable through the hole under the flash power module
slot.
Chapter 2. Installing optional devices 99
To Next Page
Loading...
