• Systems-management Ethernet connector: Connect to this connector to manage the server, by using a
dedicated management network. If you use this connector, the IMM cannot be accessed directly from the
production network. A dedicated management network provides additional security by physically
separating the management network traffic from the production network. You can use the Setup utility to
configure the server to use a dedicated systems-management network or a shared network.
• USB 2.0 connectors: Connect a USB device, such as a USB mouse, keyboard, or other device, to any of
these connectors.
• Video connector: Connect a monitor to this connector. The video connectors on the front and rear of the
server can be used simultaneously.
Note: The maximum video resolution is 1600 x 1200 at 75 Hz.
The following is an illustration of the standard I/O book board:
The server standard I/O book board provides the following slots, connectors, and integrated features:
• Integrated Management Module v.2 (IMM2)
• Real Time Management Module (RTMM)
• One ML adapter slot
• Three PCIe Gen3 slots (8 gigatransfers per second (GT/s))
• Five USB 2.0 connectors
– One internal USB 2.0 connector for Hypervisor flash USB device
– Four rear USB 2.0 connectors
• Two Trusted Platform Modules (TPM)
The standard I/O book is connected to compute book 1 and compute book 2. The standard I/O book PCIe
buses are also connected to compute books 1 and 2.
Chapter 1. The Lenovo System x3850 X6 and x3950 X6 Type 6241 server 33
To Next Page
Loading...
