EasyManua.ls Logo

Lenovo System x3850 X6 - Page 473

Lenovo System x3850 X6
1990 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Make sure that DSA and BMC/IMM are at the latest level.
Related links
Lenovo Support website
Latest level of DSA
166-802-001 : IMM I2C Test Aborted
Test cannot be completed for unknown reason.
Recoverable
No
Severity
Warning
Serviceable
Yes
Automatically notify support
No
User Response
Perform the actions mentioned one at a time and try the test after each action:
1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the latest level.
Related links
Lenovo Support website
Latest level of DSA
166-803-001 : IMM I2C Test Aborted
Node Busy. Try later.
Recoverable
No
Severity
Warning
Serviceable
Yes
Automatically notify support
No
User Response
Perform the actions mentioned one at a time and try the test after each action:
1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the latest level.
Related links
Lenovo Support website
Latest level of DSA
166-804-001 : IMM I2C Test Aborted
Invalid Command.
Recoverable
No
Severity
Appendix B. DSA diagnostic test results 459

Other manuals for Lenovo System x3850 X6

Related product manuals