system for information about your fingerprint reader. See “Access
Help” on page 58 for instructions on how to open the online help
system.
3. Connect the mouse cable to a USB connector.
4. Connect the monitor cable to the monitor connector on the computer.
v If you have a Video Graphics Array (VGA) Standard monitor, connect the
cable to the connector as shown.
Note: If your model has two monitor connectors, be sure to use the
connector on the accelerated graphics port (AGP) adapter.
v If you have a digital video interface (DVI) monitor, connect the cable to the
connector as shown.
Note: Your computer must have an adapter installed that supports the DVI
monitor.
4 User Guide
To Next Page
Loading...
