Need help?Do you have a question about the Lenovo ThinkCentre M600 and is the answer not in the manual?
Operating Environment| operating air temperature | 10°C to 35°C |
|---|---|
| storage air temperature in original package | -40°C to 60°C |
| storage air temperature without package | -10°C to 60°C |
| operating humidity | 20%–80% (non-condensing) |
| storage humidity | 20%–90% (non-condensing) |
| operating altitude | -15.2 m to 3048 m |
| storage altitude | -15.2 m to 10 668 m |
Power| input voltage | 100 V ac to 240 V ac |
|---|---|
| input frequency | 50/60 Hz |
Weight and Dimensions| width | 35 mm |
|---|---|
| height | 179 mm |
| depth | 182 mm |
| weight | 1.3 kg |
This section provides information about maintaining your computer.
This section provides information about locking your computer with the locking devices.
To view and change security settings in the Setup Utility program, do the following:
You can use BIOS passwords and Windows accounts to prevent unauthorized access.
If your keyboard has a fingerprint reader, you can use fingerprint authentication.
Your computer is preinstalled with an antivirus program.
The Setup Utility program is used to view and change the configuration settings of your computer.
This section provides information about how to enable or disable user access to hardware devices.
If you enable the Automatic Power On features, your computer will start up automatically.
You can set passwords to prevent unauthorized access to your computer and data.
You can update the BIOS from your operating system or a flash update disc.
It is recommended that you use the following procedure to resolve computer problems.
Use the troubleshooting information to find solutions to problems that have definite symptoms.
This section provides solutions to startup-related problems.
Select your symptom from the following list.
This section provides solutions to networking-related problems.
This section provides solutions to performance-related problems of your computer.
This section provides solutions to software- and driver-related problems.
The diagnostic program is used to test hardware components of your computer.
This section provides instructions about how to recover your operating system.
Do not open the static-protective package containing the new part until the defective part has been removed.
This section provides instructions on how to install or replace hardware for your computer.
Attention: Do not open your computer or attempt any repair before reading and understanding the 'Read this first'.
Information on how to obtain technical assistance, support, and warranty services.
To Next Page
