Do you have a question about the Lenovo ThinkPad X61s and is the answer not in the manual?
Bus type | FSB |
---|---|
Tjunction | 100 °C |
Processor cache | 4 MB |
Processor cores | 2 |
System bus rate | - GT/s |
Processor family | Intel® Core™2 Duo |
Processor series | Intel Core 2 Duo L7000 Series |
Processor socket | Socket 479 |
Processor codename | Merom |
Processing Die size | 143 mm² |
Processor frequency | 1.6 GHz |
Processor cache type | L2 |
Processor lithography | 65 nm |
Processor manufacturer | Intel |
Processor front side bus | 800 MHz |
Processor operating modes | 64-bit |
ECC supported by processor | No |
Thermal Design Power (TDP) | 17 W |
CPU multiplier (bus/core ratio) | 8 |
Number of Processing Die Transistors | 291 M |
Motherboard chipset | - |
HDD speed | 5400 RPM |
HDD interface | SATA |
Card reader integrated | Yes |
Total storage capacity | 120 GB |
Compatible memory cards | SD |
Display diagonal | 12.1 \ |
Display resolution | 1024 x 768 pixels |
Native aspect ratio | 4:3 |
Internal memory | 1 GB |
Memory clock speed | 667 MHz |
Internal memory type | DDR2-SDRAM |
Maximum internal memory | - GB |
Memory layout (slots x size) | 1 x 1 GB |
Discrete graphics card model | Intel® GMA X3100 |
Type | PC |
Modem speed | 56 Kbit/s |
Audio system | HDA 24-bit |
Speaker power | 0.5 W |
Number of built-in speakers | 1 |
Bluetooth version | 2.0+EDR |
Cabling technology | 10/100/1000Base-T(X) |
Networking features | WLAN, Gigabit Ethernet |
Operating system installed | Windows Vista Business |
Battery life (max) | 3.1 h |
Number of battery cells | 4 |
Charging port type | DC-in jack |
Serial ports quantity | 0 |
USB 2.0 ports quantity | 3 |
CardBus PCMCIA slot type | Type II |
Cable lock slot type | IBM |
Product color | Black |
Processor ARK ID | 29757 |
Processor package size | 35 x 35 mm |
Depth | 211 mm |
---|---|
Width | 268 mm |
Height | 20 mm |
Weight | 1310 g |
Details the purpose and components of the Microsoft Windows XP Conversion Kit.
Instructions and recommendation for creating Windows Vista recovery media.
Important notice about data deletion during conversion and the need for backups.
Configure the computer's BIOS to boot from the DVD drive.
Insert the bootable Rescue and Recovery disc into the DVD drive.
Save the BIOS settings and exit the Setup Utility.
Initiate the conversion process by booting from the Rescue and Recovery disc.
Continue the restore process in the Rescue and Recovery workspace.
Acknowledge warnings and accept the terms for the conversion.
Start the first phase of conversion and prepare for a potential supplemental disc.
Insert the Windows XP Product Recovery disc to begin the second phase.
The conversion process completes automatically with multiple restarts.
Follow on-screen prompts to finish the Windows XP setup.
Return the computer's boot order to its original settings.