• FQXSPSE4050I: [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5].
This message is for the use case where IPMI command to be sent.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0251
User Action:
Information only; no action is required
• FQXSPSE4051I: Management Controller [arg1] joined the neighbor group [arg2] by user [arg3] at IP
address [arg4].
This message is for the use case where MC joins a group.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0259
User Action:
Information only; no action is required
• FQXSPSE4052I: The password of neighbor group [arg1] is modified by [arg2] [arg3] at IP address
[arg4].
This message is for the use case where the group user password is modified.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0260
User Action:
Information only; no action is required
• FQXSPSE4053I: Management Controller [arg1] left the neighbor group [arg2] by user [arg3] at IP
address [arg4].
This message is for the use case where MC leaves a group.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0261
User Action:
Information only; no action is required
Chapter 3. XClarity Controller events 135
To Next Page
Loading...
