The zero output functions abnormally
Severity: Informational
User Action:
Information only; no action is required.
• 080801E0: PS1: Power Supply, Device Inserted / Device Present was asserted.
The PSU is installed in the indicated slot.
Severity: Informational
User Action:
Information only; no action is required.
• 080801E1: PS2: Power Supply, Device Inserted / Device Present was asserted.
The PSU is installed in the indicated slot.
Severity: Informational
User Action:
Information only; no action is required.
• 086F0180: PS1_12Va_OC_ERR: Power Supply, Power Supply Failure detected was asserted.
The 12V AUX output current experiences a current load greater than the current limit
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F0181: PS2_12Va_OC_ERR: Power Supply, Power Supply Failure detected was asserted.
The 12V AUX output current experiences a current load greater than the current limit
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F0182: PS1_12Va_OV_ERR: Power Supply, Power Supply Failure detected was asserted.
The 12V AUX output voltage reaches overvoltage lockout limit
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
Chapter 2. SMM2 events 15
To Next Page
Loading...
