EasyManua.ls Logo

Lenovo ThinkSystem D2 - Page 29

Lenovo ThinkSystem D2
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Information only; no action is required.
1D6F0030: SMM_POWER_ON: System Boot Initiated, Initiated by power up was asserted.
A event indicate SMM system power on
Severity: Informational
User Action:
Information only; no action is required.
21070150: NODE1_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
User Action:
1. Check the PSU configuration
2. Check FAN status
3. Reset BMC
4. If error recurs, reseat compute node
5. If error recurs, replace the compute node
21070151: NODE2_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
User Action:
1. Check the PSU configuration
2. Check FAN status
3. Reset BMC
4. If error recurs, reseat compute node
5. If error recurs, replace the compute node
21070152: NODE3_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
User Action:
1. Check the PSU configuration
2. Check FAN status
3. Reset BMC
4. If error recurs, reseat compute node
5. If error recurs, replace the compute node
21070153: NODE4_1ST_NOPERM: Slot Or Connector, transition to Non-Critical from OK was
asserted.
BMC failed to get the power permission to put the compute node into ready state.
Severity: Warning
Chapter 2. SMM2 events 25

Related product manuals