• FQXSPCN4002I: User [arg1] has terminated an active console session.
A user has terminated an active console session
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0145
User Action:
Information only; no action is required
• FQXSPCN4003I: Remote Control session started by user [arg1] in [arg2] mode has been closed.
Remote Control session closed
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0194
User Action:
Information only; no action is required
• FQXSPDM4000I: Inventory data changed for device [arg1], new device data hash=[arg2], new
master data hash=[arg3] .
Something has caused the physical inventory to change
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0072
User Action:
Information only; no action is required
• FQXSPDM4001I: Storage [arg1] has changed.
This message is for the use case where an IP address for the Storage Management has changed
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - IMM Network event
SNMP Trap ID: 37
CIM Prefix: IMM CIM ID: 0139
User Action:
Information only; no action is required
• FQXSPDM4002I: Device [arg1] VPD is not valid.
Chapter 3. XClarity Controller events 63
To Next Page
Loading...
