User Action:
Information only; no action is required
• FQXSPEM4017I: The RAID controller detected one or more possible configuration changes within
the subsystem. Please check the drive LED status. If necessary, contact technical support for
additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller detected one or more possible configuration changes within the subsystem
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0206
User Action:
Information only; no action is required
• FQXSPEM4018I: Enclosure/Chassis issue detected with one or more units. Please check the
enclosure/chassis units to repair the problem.([arg1],[arg2],[arg3],[arg4],[arg5])
Enclosure/Chassis issue detected with one or more units
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0207
User Action:
Information only; no action is required
• FQXSPEM4019I: Connectivity issue detected with the enclosure/chassis. Please check your cable
configurations to repair the problem.([arg1],[arg2],[arg3],[arg4],[arg5])
Connectivity issue detected with the enclosure/chassis
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0208
User Action:
Information only; no action is required
• FQXSPEM4020I: Fan problem detected with the enclosure/chassis. Please check the enclosure/
chassis unit fan for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5])
Fan problem detected with the enclosure/chassis
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
70
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
To Next Page
