• FQXSPEM4029I: All PCIe slots on [arg1] may not be functional based upon your current CPU
population.
PCIe not be functional
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0221
User Action:
Information only; no action is required
• FQXSPEM4030I: A scheduled operation on the RAID controller has encountered an issue. Refer to
RAID Logs under Server Management, Local Storage, for details.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller has scheduled operation issue
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0223
User Action:
Information only; no action is required
• FQXSPEM4031I: SSD wear threshold setting is changed from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
SSD wear threshold setting is changed by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0273
User Action:
Information only; no action is required
• FQXSPEM4032I: Acoustic Mode [arg1] has been engaged. Fan speed limits are in place.
This message is for the use case where Acoustic Mode is engaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0274
User Action:
Information only; no action is required
Chapter 3. XClarity Controller events 73
To Next Page
