• FQXSPNM4014I: LAN: Ethernet[[arg1]] interface is now active.
This message is for the use case where a Management Controller ethernet interface is now active.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0025
User Action:
Information only; no action is required
• FQXSPNM4015I: DHCP setting changed to [arg1] by user [arg2].
This message is for the use case where a user changes the DHCP setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0026
User Action:
Information only; no action is required
• FQXSPNM4016I: Domain name set to [arg1] by user [arg2].
Domain name set by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0043
User Action:
Information only; no action is required
• FQXSPNM4017I: Domain Source changed to [arg1] by user [arg2].
Domain source changed by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0044
User Action:
Information only; no action is required
• FQXSPNM4018I: DDNS setting changed to [arg1] by user [arg2].
DDNS setting changed by user
84
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
To Next Page
