Lenovo U2 - Delete User and Manage Settings; Single Deletion; Delete All; Wireless Pairing

Press the [*] [#] key, please use the admin istrator password for verification. After entering the main
menu, the user can press the corresponding number key to select the operation according to the
menu number.
Voice prompt verification deletes the Password, Fingerprint, Card or Face that has been entered,
and it is necessary to verify that the user has entered the Password, Fingerprint, Card or Face, and
the system will delete a single Password, Fingerprint, Card or Face after passing the verification.
2.5 : DELETE USER
2.5.1 : SINGLE DELETION
CAUTION
The current administrator can not be deleted, the system guarantees at least one administrator can
not be deleted to avoid the lock in the default state, the user can open the lock at will, and the user
will not be able to enter the management menu.
Delete User Password [1] [3]
Delete Fingerprint [2] [2]
Delete Card [3] [2]
Delete Face [4]
1
2
3
4
1. Password Management
2. Fingerprint Management
3. Card Management
4. Face Management
5. Wireless Pairing
6. System Setting
Select Delete All Passwords, All Fingerprints, All Cards, and All Faces, and you need to enter the
administrator password again to confirm the deletion.
2.5.2 : DELETE ALL
Delete All User Password [1] [4]
Delete All Fingerprint [2] [3]
Delete All Card [3] [3]
Delete All Face [4] [3]
1
2
3
4
1. Password Management
2. Fingerprint Management
3. Card Management
4. Face Management
5. Wireless Pairing
6. System Setting
Press the [*] [#] key, please use the administrator password for verification. After entering the main
menu, the user can press the corresponding number key to select the operation according to the
menu number.
According to the menu, press the corresponding number keys to select the desired setting option.
1. Network Setting
2. Set or Query the Time
3. Volume Setting
4. Combine Mode
5. Firmware Version
6. Operation Record Query
6
1. Password Management
2. Fingerprint Management
3. Card Management
4. Face Management
5. Wireless Pairing
6. System Setting
3 : SYSTEM SETTING
Follow the operation instructions, enter the wireless pairing state, and then set the door lock that to
be linked to the wireless pairing state at the same time, and the voive prompt “operation successful”
indicates that the linkage pairing is successful.
2.5 : WIRELESS PAIRING
1. Wireless Pairing
2. Activate
3. De-activate
5
1. Password Management
2. Fingerprint Management
3. Card Management
4. Face Management
5. Wireless Pairing
6. System Setting