18. BATTERY DOOR 20. AC SOCKET
19. AUX-IN JACK
Start-up of the device/introduction
• Select a suitable location for the device, such as a dry, flat, non-slip surface on
which it is easy to operate the machine.
• Ensure that the device is sufficiently ventilated.
• Remove the protective film from the display if it is still present.
Power Supply
• Ensure that the voltage is the same as that indicated on the model identification
plate.
• Connect the power cable supplied (see battery compartment if necessary) to a
properly installed safety power socket and the mains connector AC on the back of
the machine.
Inserting the Batteries (not included)
1. Open the lid of the battery compartment.
2. Insert 6 “C” size 1.5 V batteries. Please ensure that the polarity is correct (see the
floor of the battery compartment)!
3. Then close the battery lid.
NOTE:
When a mains cable is connected the batteries are automatically switched off.
CAUTION:
• Batteries can leak and lose battery acid. When not using the system for a long
period of time, remove the batteries.
• Different battery types or new and used batteries must not be used together.
• Do not dispose of batteries with household waste. Return old batteries to the
respective collection facilities or your dealer.
WARNING:
The batteries shall not be exposed to excessive heat such as sunshine, fire or the
like. Danger of explosion!
Listening to the Radio
1. Turn the function selector switch to the RADIO position.
2. Select desired band by using the “BAND” selector.
3. Adjust radio frequency to your desired station by using the “TUNING” control.
4. Adjust the “VOLUME” control to the desired level.
To Next Page
Loading...
