The Magivaac RV2000 is a robotic vacuum cleaner designed for household use, offering a range of cleaning modes and smart features. It is equipped with a 3-in-1 HEPA Robot Vacuum with Mop function, allowing for both dry vacuuming and wet mopping. The device can be controlled via a smartphone app (Tuya Smart app) or a remote control, and is compatible with voice assistants like Amazon Alexa and Google Home.
Function Description:
The RV2000 uses gyroscope navigation and mapping to provide efficient cleaning. It supports various cleaning modes including:
- Auto cleaning: The robot optimizes its cleaning path automatically.
- Room cleaning: Cleans a specific room, including edges.
- Spot cleaning: Intensively cleans a 5 ft radius area in a spiral pattern, ideal for concentrated dust or debris.
- Edge cleaning: Follows walls and fixed objects to ensure thorough edge cleaning.
- Mopping function: Utilizes a water tank and mopping pad for wet cleaning.
The robot is powered by a 2500mAh Li-ion battery, offering up to 140 minutes of cleaning time on a single charge. When the battery is low, it automatically returns to its charging base. The dustbin has a capacity of 600 ml, and the water tank holds 350 ml.
Important Technical Specifications:
- Model: RV2000
- Batch: PR4362
- Dimensions:
- Diameter: 330 mm
- Height: 76 mm
- Net weight: 3.40 kg
- Shell material: ABS
- Navigation: Gyroscope
- Wi-Fi: 2.4G
- Battery: 2500mAh Li-ion
- Fan motor: 2000PA
- Suction power: 400/600/1000PA (adjustable)
- Bin capacity: 600 ml
- Water tank capacity: 350 ml
- Speed: 0.3m/s
- Obstacle height: 15 mm
- Noise indicator: 60/64/67 dB
- Output voltage: 14.4 V
- Adaptor voltage: 19.0V/0.6A
- Input data: 100~240V, 50/60Hz, 0.6A
- Output data: 19.0V/0.6A
- Length of side brush: 50mm
- Power: 28W
- Charging Time: 5 hours
- Cleaning Time:
- Normal suction: About 120 minutes
- Low suction: About 140 minutes
- High suction: About 90 minutes
Usage Features:
- Control: Can be controlled via a remote control or the Tuya Smart app. The app allows for scheduling, cleaning strength adjustment, and directional control.
- App Installation: Download the Tuya Smart app (available for iOS and Android) by scanning a QR code. Register an account and add the device by selecting "Robot Vacuum (Wi-Fi)".
- Wi-Fi Connection: Supports EZ Mode and AP Mode pairing for Wi-Fi connection.
- Light Indications: The robot provides visual feedback through its power and home buttons.
- Green light solid: Indicates recharging, cleaning, or cleaning finish.
- Green light flash: Indicates recharging.
- Orange light solid: Indicates cleaning finish.
- Red light solid: Indicates power less than 20%.
- Red light flash: Indicates robot breakdown.
- Blinking lights: Indicate Wi-Fi connection status or an issue.
- Dormant Mode: If inactive for 10 minutes, the robot enters dormant mode with all lights off. Press the power button to wake it up.
- Mopping Function: Requires the water tank to be installed. Fill with clean fresh water only; do not add cleaning fluids. Do not use on carpets.
- Safety Tips:
- Remove vulnerable items (glasses, lamps, wires, paper sheets, curtains) from the floor before cleaning.
- Avoid wet environments.
- Do not place the product where it can easily fall.
- Prevent fabric or body parts from contacting drive wheels.
- Do not use near open flames.
- Ensure the dust container is empty before use if full.
- Operating temperature: 0 to 40 degrees Celsius.
- Do not use in high temperature environments.
Maintenance Features:
- Dust Container:
- Remove by pressing the dust container button and pulling it out.
- Open the side cover and remove waste.
- Open the high-efficiency filter and primary filter.
- Rinse the primary filter with water.
- Clean the dust container with a dishcloth (do not wash with water).
- Dry the dust box and filter assembly thoroughly before reinstallation.
- The primary filter should be washed every 15-30 days.
- The high-efficiency filter has a maximum service life of 3 months.
- Do not expose filters to sunlight.
- Main Brush and Side Brush:
- Open the main cover brush assembly and take out the main brush shaft.
- Use the utility tool to clean tangled hair from the main brush.
- Clean the main brush with a dry cloth.
- Ensure side brushes are installed correctly (left/right).
- Charging Dock Pins, Down-View Sensor, Drive Wheel, and Universal Wheel:
- Clean these components with a dry cloth. Avoid damp or wet cloths due to sensitive electronic components.
- Battery Maintenance:
- If storing for a long time, ensure the robot is fully charged.
- Turn off the robot and charge it every 3 months to maintain battery life.
- If the battery is over-discharged or unused for a long time, it may not be able to be charged.
- Remove the battery before disposing of the machine. Ensure the product is not powered on when removing the battery. Recycle discarded batteries safely.