4
ATTACHING THE PROPANE TANK
Step 6: Attach the power adapter
A. Hang the power adapter on the back of the base as shown.
B. Plug the adapter end into the socket on the underside of the trap body as shown.
Step 7: Attach the Propane Tank to the Base.
Do not use a Propane Tank larger than 9 kg (20 lb).
A. Place a full tank 9kg (20 lb) of propane on the base with the open side facing the bracket as
shown. Turn the tank until the top engages in the bracket. Follow the safety information listed on
the tank.
B. Attach the tank anchor thumb screw into the threaded hole on the tank bracket.
Step 8: Install/replace the battery in the spark unit.
A. The spark unit uses one “AAA” size battery. The battery is behind the black activator button.
B. Grasp the button at the base and turn to remove as shown.
To Next Page
Loading...