About this documentation
Document history
1
5
BA_CS9000DVI EN 4.0
0Fig. 0Tab. 0
1 About this documentation
Contents
This documentation provides you with information about the intended use of the monitor
panel.
The present manual is part of the "Controller−based automation" or "PC−based
automation" manual collection which you can find on the DVDs of the same name.
Target group
This documentation is directed at qualified skilled personnel according to IEC 60364.
Qualified skilled personnel are persons who have the required qualifications to carry out
all activities involved in installing, mounting, commissioning, and operating the product.
Tip!
Information and auxiliary devices related to the Lenze products can be found
in the download area at
http://www.Lenze.com
Validity
These instructions are valid for
ƒ Command Station CS 5000 DVI
ƒ Command Station CS 5010 DVI
ƒ Command Station CS 5050 DVI
ƒ Command Station CS 5070 DVI
ƒ Command Station CS 9000 DVI
1.1 Document history
Material number Version Description
.Nsó 4.0 02/2014 TD06 New:
l UL notes (French language)
l Notes RJ45 cable laying
13433083 3.0 03/2013 TD29 General Revision
13392305 2.0 11/2011 TD29 Supplement of the note concerning the protection
against direct solar radiation, as well as chapter
"Repair"
13385510 1.0 07/2011 TD29 First edition
To Next Page
Loading...
Need help?
General
