Lenze EL 103 ECO PLC User Manual

Operation
Communicating via the CAN gateway function
Establishing communication using the Global Drive Control (GDC)
8

74
LDCDS−EL100 EN 8.0
4. Click Refresh first.
The selection field displays all available OPC servers now.
EL100−043
5. Select "Lenze OPC Systembus Server" from the "Available OPC Server" selection field
and click OK.
6. Confirm your communication driver selection by clicking OK, too.
Now the GDC can be used to access the system bus via the EL100 communication module.

Lenze EL 103 ECO PLC Specifications

General

Brand	Lenze
Model	EL 103 ECO PLC
Category	Touch Panel
Language	English