Lenze EL 105 PLC User Manual

LDCDS−EL100
.Hv|
Ä.Hv|ä
Operating Instructions
HMI with Windows
â
CE

EL 1xx ECO, EL 1xx ECO PLC, EL 1xx CAN, EL 1xx PLC, EL 1xx MPI
HMI for visualisation / with control technology

Lenze EL 105 PLC Specifications

General

Brand	Lenze
Model	EL 105 PLC
Category	Touch Panel
Language	English

Summary

Safety Instructions

General Safety Instructions

Basic safety measures for Lenze components, transport, and storage.

Product-Specific Safety Instructions

Specific safety advice for HMI disposal, voltage, and temperature.

Technical Data

General Data and Operating Conditions

Electrical Data

Mechanical Data

Mechanical Installation

Installation of Screw Clamping Fixture

Step-by-step guide for mounting the HMI unit using screw clamping fixtures.

Electrical Installation

Important Notes

Critical safety warning regarding input voltage and fusing.

Wiring According to EMC

Guidelines for EMC-compliant installation, shielding, and earthing.

Wiring

Explains mains connection, serial, Ethernet, and USB interfaces.

Commissioning

Connecting External Devices

Shows HMI interfaces for PC and Simatic S7 communication.

Initial Switch-On

Steps for powering on the EL 1xx and initial system boot-up.

Establish Ethernet Connection

Guides on configuring Ethernet interface and connecting to LAN/PC.

Establish CAN Fieldbus Connection

Steps to configure the CAN interface for fieldbus communication.

Establish MPI Connection

Instructions for establishing communication with a S7 PLC via MPI.

UPS Functionality

Operation

Creating a PLC Sample Program

General Information on PLC Programming

Start PLC Designer

Create PLC Program

Create Sym File

Transfer Program to HMI

Start Program on HMI

Build Up CAN Communication with Distributed I/O Module

Guide to establishing CAN communication with I/O modules.

Access EL 1xx via Server Functionality

Enable Server Access

Steps to enable VNC, FTP, Telnet, Web, and RAS servers.

FTP Server - Transmit Data

Web Server (SysAdmin) - Manage Processes, Files, Registry

Telnet Server - Manage Files at the Windows Command Prompt

VNC-Server - Operate the EL 1xx by Remote Control via Internet or LAN

Remote operation of EL 1xx via VNC client.

RAS Server - Operate Your EL 1xx by Remote Control via Telephone Line

Communicating via the CAN Gateway Function

How to use the CAN gateway for communication.

Important Notes

Crucial notes for PLC communication via CAN gateway.

Establishing Communication Using the System Bus Configurator

Steps to configure the system bus for CAN communication.

Establishing Communication Using the Global Drive Control (GDC)

Establishing Communication Using the L-force Engineer

Establishing Communication Using the Drive PLC Developer Studio (DDS)