Need help?Do you have a question about the Lenze EVF8202-E and is the answer not in the manual?
General| Type | DC Drive |
|---|---|
| Output Power | 0.75 kW |
| Power Rating | 0.75kW |
| Protection Class | IP20 |
| Weight | 1.5 kg |
| Output Current | 2.0 A |
| Communication Interface | RS485 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
Essential safety guidelines and precautions for operating the drive controllers.
Presents detailed rated data for the frequency inverters, including overload capabilities.
Guidance on selecting appropriate fuses and cable cross-sections for safe operation.
Covers the physical aspects of installing the drive controllers, including mounting and environment.
Details the process of assembling the units using standard fixing rails or angles.
Covers all aspects of electrical wiring and connections for the controllers.
Crucial safety and procedural notes for electrical installation.
Details how to connect the main power supply to the controllers.
Guides on wiring and connecting control signals and inputs/outputs.
Pre-commissioning checks and steps to ensure correct wiring and setup.
Adjusting controller parameters to match the specific requirements of the machine.
Configuring ramp times for smooth acceleration and deceleration.
Setting the maximum current limit to protect the motor and controller.
General guidance on identifying and resolving operational issues and faults.
A list of fault codes, their causes, and recommended remedies.
To Next Page