Lenze g500-B - Product Extensions

Product extensions
Torque plates
The torque support is usually eected by means of the foot or ange. The torque plates that
can be ed are another possibility. In this case, the torque support is provided only via one
point and is suitable for sha-mounted gearboxes, among other things. Supplied rubber
buers ensure a stress-free installaon and absorb slight impacts.
The torque plates are available in two versions, for being installed at the exisng threaded
pitch circle or for the foot at the gearbox.
In addion, torque support for the g500-B45 gearbox can be eected via the holding xture of
the housing which is integrated on both sides.
Product extensions
Torque plates
117