Lenze g500-B110 - Ventilation

Venlaon
No venlaon measures are required for the gearboxes g500-B45 … B240.
The gearbox g500-B240 can oponally be ed with venlaon units.
From g500-B450 onwards, the gearboxes are supplied with venlaon units as
standard.
To reduce the number of dierent versions, the gearboxes can also be ordered with combined
mounng posions:
•
g500-B110 ... B450 in mounng posion M1/5/6 (AEF)
In these gearboxes, the lubricant amount has been opmised for the use in
dierent mounng posions. If required, the breather elements are loosely
enclosed and must be mounted before commissioning depending on the
mounng posion.
4The modular system ^ 10
NOTICE
▶
For gearboxes with venlaon, a gap of at least 30 mm has to be observed to the machine
wall on the corresponding gearbox side.
Informaon on project planning
Final conguraon
Venlaon
33