Lenze MC-PBM - Identification; Application as Directed

3 Product description
Identification
LDCDS−MC−PBx DE/EN 3.0
32

−H1−Bestgem Verwend Allg
Identification
Type code MC − PBx − xx
Module Card
PBM = PROFIBUS master
PBS = PROFIBUS slave
Version
Application as directed
The MC−PBM and MC−PBS are plug−in cards for connecting a Lenze device to a PROFIBUS
system.
Whereas the slave interface connection (MC−PBS) serves to address the device as a node
under a PROFIBUS control, the master interface connection (MC−PBM) serves to enable the
user to establish a control on the basis of PROFIBUS.
The MC card is used as directed if it is solely used in lenze device with MC card interface. A
different use, or one beyond these purposes, is not permissible. For further informations see
system manual IPC oder system manual Visualisation.