4
LB -400Bass DIY Kit
3
Assembling
© 2020 -All rights reserved! Copying is strictly prohibited!
3.2 Paint the bass
It isimportant to paint the bodyand neckbeforeassembly.
Alwayswear a dustmaskwhenapplying spraypaint.
3.2.1 Fillup the grain.
Thebody is madeof mahogan, and theneck is
made of solid maple. Open grained woods need
to be filled before finishing in order to achieve a
flat surface.
WesuggestusingourNeutral Color
Tonegrainfiller following the instructions on the
label. Three applications are recommended to
get a nice flat surface to build finish coats
over.The grain filler can also be used to fill any
gaps, chips,or other imperfections in the wood.
Asa general rule, youshould fillup the
grainuseNeutral Color Tone grainfiller until you
can't seethe poresof the wood with the
nakedeyes. Then we can start for the precess
below.
Use a damp cloth for dip with your favorite color
and wipe on the body and neck as you like. Not
only one time may can not reach the exactly
what you espected, so sand with 320-grit and
wipe again and again until got your lovely color.
3.2.2 Coloring the body
To Next Page
Loading...