5
LB -400Bass DIY Kit
3
Assembling
© 2020 -All rights reserved! Copying is strictly prohibited!
3.2.3 Coloring the Neck
Sand the back of the neck use the same
method for sand the body. Before you painting
the neck please make sure that will you paint
the back or not, if not you have to tape the side
of the headstock.
Use the same method for stain the top of
headstock, then you got this and waiting for
dry then sand it.
Most players are like the natural back of the
neck, so you can use the tone oil only for coated
on the back of neck. And sand it after it
completely dry, and coat again, after dry enough
sand it again. Keep the operation several times
then you can polish it more glossy.
To Next Page
Loading...