LEO 3WZ-3600 - User Manual

Defines safety symbols like CAUTION, WARNING, AUCTION, and NOTE for hazard communication.

Details hazards and prevention methods for fire and explosion risks.

Outlines hazards from exhaust fumes and cleaning fluids, with prevention.

Covers hazards related to leaks during transport and storage.

Warns about burns from hot components and how to avoid them.

Explains high-pressure fluid hazards and injection injury prevention.

Covers hazards from high-velocity spray and projectile risks.

Details dangers of using chemicals and recommended precautions.

Addresses general unsafe practices and starting procedures.

Warns about electrical hazards and prevention methods.

Lists all components and accessories provided in the product packaging.

Details pump RPM, maximum pressure, capacity, and power requirements.

Provides sequential instructions for assembling the pressure washer components.

A comprehensive list of all parts with their corresponding numbers.

A visual diagram showing the breakdown of the pump assembly with part labels.

Explains the fundamental components of the pressure washer and their functions.

Refers to the engine manual for its basic components and operation.

Defines key terms and units used in the manual, like PSI and GPM.

Guides on how to lower the pressure setting for different cleaning tasks.

Instructions on how to operate the spray wand effectively.

Step-by-step procedure for safely changing spray nozzles.

Method for using cleaning agents with the pressure washer.

Outlines the steps required to safely start the pressure washer engine.

Details the correct steps to safely turn off the pressure washer.

Explains why regular maintenance is crucial for performance and longevity.

Outlines critical safety rules and precautions for performing maintenance tasks.

Covers checking and changing the engine oil level and type.

Details the procedure for checking and changing the pump oil.

Instructions on how to clean the spray wand, especially nozzles.

Step-by-step guide to clean the water inlet filter.

Procedures for inspecting, cleaning, and replacing air filters.

Guidance on inspecting, gapping, and replacing spark plugs.

Instructions on how to adjust the engine's idle speed.

Maintenance steps for the optional spark arrester.

Steps to prepare the engine for long-term storage.

Steps to prepare the pump for storage, especially for freezing weather.

Information on fuel stability and preventing deterioration during storage.

How to use fuel stabilizer to extend fuel storage life.

Procedure for safely draining fuel from the tank and carburetor.

Guidelines and precautions for transporting the pressure washer.

Troubleshooting steps for common engine starting failures.

Diagnosing and resolving issues causing low engine power.

Troubleshooting steps for problems with drawing chemicals.

Addressing causes of no or low pressure during operation.

Troubleshooting guide for leaks at the gun, wand connection, and pump.

Identifying and fixing causes of pump pulsation.

Outlines the duties and responsibilities of the engine owner.

Key safety precautions to follow when refueling the engine.

Warns about the high temperature of the exhaust and muffler.

Explains the dangers of carbon monoxide from exhaust fumes.

Explains how to operate the fuel valve lever for starting and stopping.

Details how to use the throttle lever to control engine speed.

Describes the function and use of the choke lever for starting.

Instructions on how to properly use the recoil starter grip.

Pre-operation inspection of the engine's overall condition.

Procedure to verify the engine oil level before use.

Inspecting the air filter for cleanliness and damage.

Verifying the fuel tank is adequately filled before operation.

General safety guidelines to follow before and during engine operation.

Step-by-step instructions for starting the gasoline engine.

Correct procedures for shutting down the engine safely.

How to adjust the throttle lever for desired engine speed.

Details serial number location and general technical data.

Instructions for correctly connecting a 12V battery for electric starting.

Installation guidance for optional remote throttle and choke controls.

Advice on modifying the carburetor for optimal high-altitude performance.

Information and recommendations for using oxygenated fuels like ethanol.

Information on the engine's emission sources and environmental impact.

Discusses consequences of altering emission control systems.

Symptoms indicating potential emission control system issues.

Recommendations for using genuine parts for emission system maintenance.

Guidance on engine tune-up procedures and specifications.

Information on available publications for engine maintenance and repair.

Details on how to access the illustrated parts catalog.

A summary of key technical data and maintenance intervals.

A table listing detailed technical specifications for various engine models.

Diagrams illustrating the engine's electrical system connections.

Guidelines for using the optional battery, including polarity and electrolyte level.