Need help?Do you have a question about the Lepai LP-2020A+ and is the answer not in the manual?
Power| input power | DC10-14.4V >2A |
|---|---|
| output power | 20W x 2 RMS |
Audio Specifications| speaker impedance | 4-8 Ohm |
|---|---|
| frequency response | 20Hz-20KHz |
| minimum THD | <0.5% |
| SNR | >80dB |
| input sensitivity | 200 mV |
| input impedance | 47k Ohm |
Highlights efficient Tripath TA2020 chip, multiple inputs, durable aluminum enclosure, compact size, and spring terminals.
Details the Class-T Tripath TA2020 IC for low distortion, suitability for home/car audio, and Tone/Direct switching functionality.
Explains built-in loudspeaker and over-voltage protection circuits for speaker safety and amplifier shutdown.
Details the required DC input voltage and current for the amplifier's operation.
States the RMS output power per channel for the amplifier.
Specifies the compatible speaker impedance range for optimal performance.
Indicates the range of audio frequencies the amplifier can accurately reproduce.
Specifies the maximum allowable total harmonic distortion.
Indicates the ratio of signal power to noise power for audio clarity.
Defines the minimum input signal level required for full output power.
Specifies the input impedance of the amplifier's audio inputs.
To Next Page
