To Next PageTo Next PageWhat to do if my Lepu Medical LFR30B shows an Eeprom error?
If your Lepu Medical Thermometer displays an 'Eeprom error', it indicates an issue that requires professional assistance. Please contact customer service for support.
What to do if my Lepu Medical LFR30B displays a hardware error?
If your Lepu Medical Thermometer displays a 'Hardware error', it means there's a problem that needs expert attention. Please get in touch with customer service for help.
Why does my Lepu Medical LFR30B Thermometer show measured temperature too high?
If your Lepu Medical Thermometer is showing a temperature that seems too high, it might be because the reading is exceeding the device's measurement range limit.
What to do if my Lepu Medical LFR30B Thermometer shows measured temperature too low?
If your Lepu Medical Thermometer is showing a temperature that seems too low, try moving to another warm or cold room.
General| Display Resolution | 0.1°C (0.1°F) |
|---|---|
| Display | LCD |
| Type | Infrared Thermometer |
| Measurement Range | 32.0°C - 42.9°C (89.6°F - 109.2°F) |
| Accuracy | ±0.2°C (±0.4°F) between 35.5°C to 42°C (95.9°F to 107.6°F) |
| Operating Conditions | 10°C - 40°C (50°F - 104°F), Relative Humidity ≤ 85% |
| Storage Conditions | -20°C - 55°C (-4°F - 131°F), Relative Humidity ≤ 85% |
| Power Supply | 2 x AAA Batteries |
| Automatic Shut-off | ≤ 30 seconds |
| Battery | 2 x AAA Batteries |
| Auto Power Off | Yes |
