EasyManua.ls Logo

Leroy-Somer LSA 32.1 L10 User Manual

Leroy-Somer LSA 32.1 L10
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
4
265
1
70
ALTERNATEURS - ALTERNATORS
LSA 32.1 - Monophas
LSA 32.1 - Monophas
é/single phase
/single phase
Installation et / and maintenance
Installation et / and maintenance
R f. 1198 - 033 / d - 03.95
Cette notice doit être transm
ise
à l'utilisateur final
Question and Answer IconNeed help?

Do you have a question about the Leroy-Somer LSA 32.1 L10 and is the answer not in the manual?

Leroy-Somer LSA 32.1 L10 Specifications

General IconGeneral
BrandLeroy-Somer
ModelLSA 32.1 L10
CategoryEngine
LanguageEnglish

Summary

1 - Généralités

1.1 - Caractéristiques

Technical specifications of the LSA 32.1 PARTNER alternator, including excitation type and conformity.

1.2 - Utilisation en charge

Details on continuous, emergency, and maximum service duty cycles for the alternator.

2 - Schémas de principe

2.1 - Monophasé 4 fils

Wiring diagram for single-phase 4-wire configurations, showing high and low voltage connections.

2.2 - Monophasé 3 fils avec charge batterie

Wiring diagram for single-phase 3-wire systems with 12/24V DC output for battery charging.

2.3 - Caractéristiques composants

Component characteristics including resistances, capacitors, and diodes for various LSA 32.1 models.

3 - Operation de montage et de démontage

3.1 - Instructions de montage

Step-by-step guide for mounting the alternator onto the engine, including torque specifications.

3.2 - Instructions de démontage

Detailed instructions for safely disassembling the alternator from the engine and its components.

3.3 - Alternateurs bi-paliers

Technical details for two-bearing alternators, including belt adjustment and radial force limits.

3.4 - Stockage - Emplacement

Guidelines for proper storage location and conditions to prevent damage or performance issues.

3.5 - Outillage mécanique et électrique minimum

List of essential mechanical and electrical tools required for alternator maintenance and testing.

4 - Mise en service

5 - Défauts possibles - Pièces à vérifier

6 - Comment effectuer les tests électriques

6.1 - Mesure des résistances des enroulements

Procedure for measuring winding resistances of the stator and rotor using a multimeter.

6.2 - Mesure des diodes

Steps for checking the diodes on the rotor, including forward and reverse bias measurements.

6.3 - Mesure du condensateur

Method for testing the capacitor's functionality by measuring current draw in an AC circuit.

7 - Nomenclature

8 - Pièces détachée A QUI S'ADRESSER?

Related product manuals