Do you have a question about the Leslie E-600L and is the answer not in the manual?
Addresses issues causing an unwanted increase in water temperature, especially at low flows.
Solves problems related to water temperature falling below the setpoint, particularly during low usage.
Diagnoses issues causing temperature drops before reaching rated capacity.
Identifies causes for inadequate steam flow to the heat exchanger.
Addresses problems related to overly high steam pressure supplied to the heater.
Solves issues where water temperature exceeds the desired setpoint during low flow conditions.
Addresses issues causing an unwanted increase in water temperature, especially at low flows.
Solves problems related to water temperature falling below the setpoint, particularly during low usage.
Diagnoses issues causing temperature drops before reaching rated capacity.
Identifies causes for inadequate steam flow to the heat exchanger.
Addresses problems related to overly high steam pressure supplied to the heater.
Solves issues where water temperature exceeds the desired setpoint during low flow conditions.
| Rated Power | 6000W |
|---|---|
| Protection Level | IPX4 |
| Weight | 3.5kg |
| Power Supply | 220V/50Hz |
| Temperature Range | 30-55°C |
Loading...