EasyManua.ls Logo

LESP SJ530 - Battery and Brush Information; Install battery; Information of Brush and scouring pad

Default Icon
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shanghai Jianghuai Environmental Equipment Co.,LTD
9
● A set of Battery cable - Standard
● One Squeegee blade - Standard
● One brush
-
Standard
● One needle plate
-
Standard
● Other accessories - Optional
3 Before disassemble the packing of machine , pls remove the machine fixed shipping fixture and
rope on the warehouses. With assistance,unloading the machine carefully from the warehouse.
Note: If you do not use the loading floor, do not directly promote the machine to avoid
Machinery Breakdown.
Note: To avoid machine damage, please unload the machine from the warehouse and then install
the battery.
Install battery
WARNING: Fire or explosion hazard. Battery release hydrogen. Keep away from sparks or
open fire. The battery cover shall be kept open while charging .
1 Park the machine on level ground, and take out the key.
2 Lift the water tank so that the battery compartment is exposed can be touched.
Carefully install batteries in the battery compartment gates, and in accordance with the shown
below
Black
Red
Connect the battery positive cable machine
Note: Do not throwing the battery to the battery compartment, to prevent damage to the battery
and the machine.