Leto Muro Furniture Allegra Double Landscape Wall Bed User Manual

1
PATENT PENDING/ BREVET EN ATTENTE/ PATENTE PENDIENTE
NOTE/ NOTE/ NOTA
1) THIS WALLBED IS TO BE USED IN HOMES WITH STANDARD CONSTRUCTION, THE BUTTERFLY TOGGLES ARE TO BE USED IN DRY-
WALL THAT IS AT LEAST 1/2” DEEP.
2) IF ANY ASSEMBLY IS DONE ON NON-STANDARD CONSTRUCTION, RETAILER OR MANUFACTURER IS NOT RESPONSIBILE FOR ANY
DEFECTS OR DAMAGES.
3) FOR ANY ASSEMBLY IN NON-STANDARD CONSTRUCTION, PLEASE CONSULT A PROFESSIONAL INSTALLER.
1) CE LIT MUR DOIT ÊTRE UTILISÉ DANS LES FOYERS AVEC LA CONSTRUCTION STANDARD. LES ANCRES DE PAPILLON DOIVENT
ÊTRE UTILISÉ DANS LES CLOISONS SÈCHES QUI ONT AU MOINS 1/2” DE PROFONDEUR.
2) SI L’ASSEMBLAGE SE FAIT SUR LA CONSTRUCTION NON-STANDARD, LE DÉTAILLANT OU FABRICANT N’EST PAS RESPONSABLE
POUR TOUT DÉFAUTS OU DOMMAGES.
3) POUR TOUT ASSAMBLAGE DANS LA CONSTRUCTION NON-STANDARD, S’IL VOUS PLAÎT CONSULTER UN INSTALLATEUR PROFES-
SIONNEL.
1) ESTA CAMA PARED SE DEBE UTILIZAR EN HOGARES CON CONSTRUCCIÓN ESTÁNDAR, MARIPOSA ENCLAJE DEBEN SER UTILI-
ZADO EN YESO QUE ES POR LO MENOS 1/2” DE PROFUNDIDAD.
2) SI ALGUNA ASAMBLEA SE HACE EN CONSTRUCCIÓN NO STANDARD, COMERCIANTE O FABRICANTE NO SE RESPONSABLIZA DE
TODOS LOS DEFECTOS O DAÑOS.
3) PARA EL ARMADO EN CONSTRUCCIÓN NO STANDARD, CONSULTE A UN INSTALADOR PROFESIONAL.
83-5/8"
2125mm
20"
506mm
62-1/2"
1588mm

Leto Muro Furniture Allegra Double Landscape Wall Bed Specifications

General

Brand	Leto Muro Furniture
Model	Allegra Double Landscape Wall Bed
Category	Indoor Furnishing
Language	English

Summary

Product Assembly and User Guide

Important Installation Notes and Warnings

Crucial notes on standard construction, drywall depth, and responsibilities for non-standard installations.

Customer Service and Warranty Information

Details on contacting customer service, warranty validation, and required information for assistance.

Assembly Tools and Cleaning Instructions

Lists required tools not included and provides instructions for cleaning and maintaining the product.

Frame Preparation and Initial Assembly

Steps for preparing the left and right frames and starting the main bed frame assembly.

Back Frame and Bed Frame Installation

Guides for installing the back frame and continuing the bed frame assembly process.

Metal Frame Leveling and Placement

Instructions for leveling the metal frame on various surfaces and positioning it correctly.

Wall Preparation and Bracket Mounting

Steps for preparing the wall and securely mounting the wall brackets for bed support.

Bed Frame Structure and Foot Support Assembly

Continues bed frame assembly and details the installation of the foot support mechanism.

Piston Installation and Operation Notes

Guides piston installation and explains their function and operational considerations.

Lower Apron and Door Preparation

Instructions for installing the lower apron and preparing the doors for mounting.

Door Installation and Securing

Steps for installing the doors and ensuring they are properly secured and locked.

Rubber Stopper and Gable Installation

Instructions for installing rubber stoppers and the side gable panels.

Back Panel and Top Shelf Installation

Guides for installing the upper back panel and the top shelf component.

Securing Bed to Wall Structure

Critical procedure for securely attaching the bed to wall studs using provided L-brackets.

Bed Frame Folding and Lifting Operations

Instructions for operating the bed by folding the foot support and lifting the frame.

Final Locking Mechanism and Product Security

Details on engaging the final lock to secure the bed and important notes for safe product use.