EasyManua.ls Logo

Lettino COSMO User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WAŻNE, ZACHOWAĆ DO
PÓŹNIEJSZEGO STOSOWANIA:
UWAŻNIE PRZECZYTAĆ.
Wyrób zgodny z PN-EN 716-1+AC:2019-07
Zaleca się stosować materac o wymiarach 120x60x8 cm.
Myć delikatnie wilgotną szmatką, używać łagodnego detergentu.
OSTRZEŻENIA:
INFORMACJE UŻYTKOWANIA:
1)
2)
1)
2)
3)
4)
5)
6)
7)
8)
9)
Uwaga! Aby uniknąć zagrożenia uduszenia się dziecka, przed użyciem wyrobu usunąć
opakowanie z tworzywa sztucznego. Opakowanie zniszczyć lub trzymać w miejscu niedo-
stępnym dla dzieci i niemowląt.
Ostrzeżenie: Bądź świadom ryzyka, jakie stanowi otwarty ogień oraz inne źródła ciepła,
takie jak promienniki elektryczne lub gazowe, itp. umieszczone w pobliżu łóżka.
Ostrzeżenie: Nie używać łóżka, jeżeli jakikolwiek jego element jest uszkodzony, rozdarty
lub brakuje elementu, używać tylko elementów dopuszczonych przez producenta.
Ostrzeżenie: Nie pozostawiać w łóżeczku czegokolwiek ani nie ustawiać łóżka w pobliżu
innego sprzętu, który mógłby stanowić podparcie dla stopy lub spowodować niebezpie-
czeństwo uduszenia lubpowieszenia dziecka, np. przewody, sznurki zasłon/żaluzji.
Ostrzeżenie: Nie używać w łóżeczku więcej niż jednego materaca.
Najniższe położenie jest najbezpieczniejsze i gdy dziecko zaczyna samodzielnie siadać,
zaleca się używać tylko tego poziomu.
Aby zapobiec obrażeniom dziecka wskutek upadku łóżeczko nie powinno być dłużej
używanie, jeżeli dziecko potra się wspinać i wyjść z łóżeczka.
Grubość materaca powinna być taka, aby wewnętrzna wysokość (mierzona od górnej
płaszczyzny materaca do górnej krawędzi ramy łóżeczka) wynosiła co najmniej 500 mm w
najniższym położeniu dna i co najmniej 200 mm w najwyższym położeniu dna łóżka.
Minimalny wymiar materaca powinien być taki, aby szczelina między materacem, a
bokami i szczytami nie przekraczała 30 mm. Zaleca się stosować materac o wymiarach
120x60x8 cm, lub inny spełniające powyższe założenia.
Wszystkie okucia podczas ich montażu powinny być dobrze dokręcone oraz regularnie
sprawdzane i w razie konieczności dokręcone.
30 - 40 MIN.
INSTRUKCJA MONTAŻU
ASSEMBLING INSTRUCTION
IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY
The product complies with BS-EN 716-1+AC: 2019-07
It is recommended to use a mattress with dimensions of 120x60x8 cm
Wash gently with a damp cloth, use a mild detergent.
WARNINGS:
USAGE INFORMATION:
1)
2)
1)
2)
3)
4)
5)
6)
7)
8)
9)
Warning: To avoid the risk of suocation for children, remove the plastic packaging
before using the product. Destroy the packaging or keep away from babies and children
Warning: Be aware of the risk of open re and other sources of strong heat, such as
electric bar res, gas res, etc. in the near vicinity of the cot.
Warning: Do not use the cot if any part is broken, torn or missing and use only spare
parts approved by the manufacturer.
Warning: Do not leave anything in the cot or place the cot close to another product,
which could provide a foothold or present a danger of suocation or strangulation, e.g.
strings, blind/curtain cords.
Warning: Do not use more than one mattress in the cot.
The height of the cot base is adjustable, the lowest position is the safest and the base
should always be used in that position as soon as the baby is old enough to sit up.
To prevent injury to the child from a fall, the bed should no longer be used if the child
can climb and climb out of bed.
Thickness of the mattress shall be such that the internal height (surface of the mattress
to the upper edge of the cot frame) is at least 500 mm in the lowest position of the cot
base and at least 200 mm in the highest position of the cot base. The cot dimension
shall be taken into account. That there shall be no gap more than 30 mm between the
mattress and the sides end ends in any position of the mattress. (It is recommended to
use a mattress with dimensions of 120x60x8 cm)
All assembly ttings should always be tightened properly and that's ttings should be
checked regularly and tightened as necessary.
Producent:
Lettino sp. z o.o. Grzybno 66, 87-327 Bobrowo
e-mail: biuro@lettino.pl NIP 8741803937
COSMO
electronic version of
the assembly instruction
instrukcja montażu
w wersji elektronicznej
x 12
P1
x 1
P2
x 8
P3
x 12
P4
x 4
P5
x 4
P8
x 4
P9
x 8
P10
0 10 x 1 O 8 x 32 M7 x 55
M6 x 55 M6 x 75 M6 x 110
A1
E
D
C
A2
B
B
B
B
1
Question and Answer IconNeed help?

Do you have a question about the Lettino COSMO and is the answer not in the manual?

Lettino COSMO Specifications

General IconGeneral
BrandLettino
ModelCOSMO
CategoryBaby & Toddler Furniture
LanguageEnglish

Summary

Usage Information

Recommended Mattress Size

Specifies the recommended mattress dimensions for optimal fit and safety.

Cleaning Instructions

Guidance on how to clean the product using a damp cloth and mild detergent.

Safety Warnings

Packaging Suffocation Risk

Instruction to remove and safely dispose of plastic packaging to prevent suffocation hazards.

Fire and Heat Hazard Awareness

Caution against placing the cot near open fires or heat sources like electric or gas heaters.

Use of Damaged or Missing Parts

Advises against using the cot if any part is damaged or missing, recommending approved spare parts.

Entrapment and Strangulation Hazards

Warning to keep the cot clear of objects that could cause entrapment or strangulation, like cords.

Multiple Mattress Prohibition

Prohibits the use of more than one mattress inside the cot for safety reasons.

Cot Base Height Adjustment

Details the adjustable cot base, recommending the lowest position for safety, especially for sitting babies.

Fall Hazard From Climbing

Instructs to discontinue use if the child can climb out of the cot to prevent fall injuries.

Mattress Fit and Clearance Requirements

Specifies mattress thickness, internal height requirements, and gap limits for safety.

Assembly Fitting Tightening and Checks

Emphasizes proper tightening of all fittings and regular checks to ensure continued security.