16
be shown in the lower portion of the display. When ranging an
object with True Golf Range activated, the upper display will
show the TGR distance, and the lower display will show the
line-of-sight distance briefly, followed by the word “club”,
followed by the club recommendation. The True Golf Range will
remain visible in the upper portion of the display.
TO ACTIVATE CLUB SELECTOR:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds
to enter the Quick Set Menu.
3) Verify that TGR is turned on; if TGR is not
activated, you will not be able to enter club
selections. See “To Activate TGR”.
4) Press and release MODE until “club”
is displayed.
5) While “club” is shown in the lower portion of the display,
press and release POWER as necessary until “On” is shown in
the upper portion of the display.
6) To save the changes and return to ranging mode, let the unit
sit idle for at least 30 seconds until an automatic power-down
occurs, or simply press and hold MODE for at least 2 seconds.
To continue through the Quick Set Menu and manipulate
To Next Page
Loading...
Need help?
General
