21
TO ACTIVATE CLUB SELECTOR:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second and then release to
enter the Quick Set Menu.
3) Verify that TGR is turned on; if TGR is not
activated, you will not be able to enter club
selections. See “To Activate TGR” above.
4) Press and release MODE until “club” is displayed.
5) While “club” is shown in the lower portion of the display, press and
release POWER as necessary until “On” is shown in the upper portion of
the display.
6) To save the changes and return to ranging mode, let the unit sit idle for at
least 30 seconds until an automatic power-down occurs, or simply press and
hold MODE for at least 2 seconds. To continue through the Quick Set Menu
and manipulate another feature, press and release MODE until the
appropriate mode is displayed.
To Next Page
Loading...
