15
FUNCTION 3: CURRENT TEMPERATURE INPUT (GX-4 WITH
SMART KEY INSTALLED ONLY)
Temperature is one of the factors used to determine TGR
ranges; inputting the current temperature will increase the
accuracy of your TGR measurement. The default tempera-
ture setting is 75
degrees
F. After activating TGR and press-
ing/releasing MODE, the last saved temperature will be
flashing in the bottom portion of the display. Press POWER
to set the temperature to match the current conditions;
each depression of POWER will increase the temperature
setting by 5 degrees. The total range of available tempera-
ture settings is 30
degrees
to 120
degrees
F. Press MODE to
save your setting and move to the next function.
NOTE: If yards is selected as the desired measurement output, the temperature
will automatically be measured in Fahrenheit. If meters is selected, the tempera-
ture will be measured in Celsius.
press and hold MODE for at least 1 second. To continue through the
Quick Set Menu and manipulate another feature, press and release
MODE until the appropriate mode is displayed.
To Next Page
Loading...
Need help?
General
