To Next Page
J
jkimAug 1, 2025
What does it mean when my Leuze electronic BCL548i displays a device error?
- AApril ThorntonAug 2, 2025
A device error on your Leuze electronic Barcode Reader indicates that a critical, manufacturer-specific issue has occurred.
What does it mean when my Leuze electronic BCL548i displays a device error?
A device error on your Leuze electronic Barcode Reader indicates that a critical, manufacturer-specific issue has occurred.
What does 'Output Update Ignore Warning' mean on my Leuze electronic Barcode Reader?
The 'Output Update Ignore Warning' on your Leuze electronic Barcode Reader indicates that the received output data could not be processed, likely due to an output data buffer overflow.
General| Brand | Leuze electronic |
|---|---|
| Model | BCL548i |
| Category | Barcode Reader |
| Language | English |
Explanation of symbols used in the technical description.
General safety instructions and regulations for operating the device safely.
Guidelines and warnings regarding safe operation and handling of the BCL 548i.
Details on the two types of mounting arrangements for the BCL 548i.
Description of the M12 connectors and their pin assignments for electrical connections.
General overview of the BCL 500i series high-speed scanners and their capabilities.
Details on the BCL 548i as a PROFINET-IO device, including supported features.
General specifications for the BCL 548i line scanners without heating.
Table listing all BCL 548i models, their descriptions, and part numbers.
Guidelines for safely packaging, transporting, and storing the device.
Description of the two methods for mounting the BCL 548i using screws or mounting devices.
Safety precautions and warnings related to electrical connections and power supply.
Details of the M12 plug/socket connections for power, I/O, and communication interfaces.
Diagram showing the layout of the control panel including display, LEDs, and buttons.
Description of the PWR and BUS LED states and their meanings.
Instructions for establishing a connection between the BCL 548i and a PC via USB.
Step-by-step guide to install the necessary USB driver for PC detection.
Explanation of the PROFINET-IO communication profile and supported protocols.
Detailed steps for configuring the BCL 548i with a Siemens Simatic S7 PLC.
Introduction to online commands for device control and configuration via serial interface.
Table listing common errors, their possible causes, and recommended measures for resolution.
Explanation of the type designation system for BCL 500i and BCL 548i devices.
List of available accessory connectors for the BCL 548i.
General information stating that the device typically requires no operator maintenance.
Formal declaration of conformity with relevant European standards and directives.
Visual examples of various bar code types and their corresponding module numbers.
