Need help?Do you have a question about the Leuze electronic BPS 307i and is the answer not in the manual?
General| Resolution | 0.1 mm |
|---|---|
| Protection Class | IP 65 |
| Interface | RS 232 |
| Light Source | LED |
| Operating Temperature | 0 ... 50 °C |
| Voltage Supply | 10 - 30 V DC |
| Storage Temperature | -20 ... 70 °C |
Defines the proper application and purpose of the BPS device.
Details laser safety regulations, warnings, and precautions to avoid radiation exposure.
Provides a general overview of the BPS device, its construction, and components.
Details the types of bar code tapes, their characteristics, and usage guidelines.
Explains how position is measured and the parameters affecting its accuracy.
Introduces the webConfig tool for configuration, diagnostics, and process data display.
Provides detailed instructions and remarks for mounting the bar code tape correctly.
Details the various mounting methods and devices available for the BPS.
Details the pin assignments for the different connection types (PWR/SW IN/OUT, SSI).
Explains how to configure the SSI interface parameters for data communication.
Describes how to configure the BPS using the switches on the MS 307/MK 307 connection hoods.
Guides the user through the installation process for the webConfig tool software and USB driver.
Provides an overview of the webConfig tool's operating modes and main functions.
Offers initial steps and guidance for troubleshooting device failures and errors.
Explains the meaning of the PWR and BUS LEDs for diagnosing device status and errors.
Lists key technical specifications for the BPS, including optics, laser class, and working range.
Presents dimensional drawings of the BPS device and its various connection hoods.
Details the available bar code tapes, including part numbers, lengths, and heights.
To Next Page
