Leuze electronic BPS 307i - 1 BPS Without Heating; 2 BPS with Heating

Technical data
Leuze electronic BPS 307i 79
Table 13.6: Certifications, conformity
13.1.1 BPS without heating
Table 13.7: Electrical equipment
Table 13.8: Ambient temperature
13.1.2 BPS with heating
Conformity CE, CDRH
Certifications UL 60950-1, CSA C 22.2 No. 60950-1
CAUTION
UL applications!
 For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC (National
Electric Code).
CAUTION
UL applications!
 For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC (National
Electric Code).
Interface type SSI
SSI clock rate (CLOCK): 50 kHz … 800 kHz
Service USB interface Mini-B type USB 2.0 socket
Switching input / switching output Two switching inputs/outputs
Switching input: 18 … 30 VDC depending on supply volt-
age, I max. = 8 mA
Switching output: 18 … 30 VDC, depending on supply
voltage, I max. = 60 mA (short-circuit proof)
Switching inputs/outputs protected against polarity rever-
sal!
PWR LED green Device ready (power on)
Operating voltage U
B
18 … 30 VDC (Class 2, protection class III)
Power consumption Max. 3.7 W
Ambient temperature (operation) -5 °C … +50 °C
Ambient temperature (storage) -35 °C … +70 °C
CAUTION
UL applications!
 For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC (National
Electric Code).