Leuze electronic BPS 307i - Bar Code Tape

Technical data
Leuze electronic BPS 307i 80
Table 13.9: Electrical equipment
Table 13.10: Ambient temperature
13.2 Bar code tape
Table 13.11: BCB dimensions
Table 13.12: BCB structure
Operating voltage U
B
18 … 30 VDC
Power consumption Max. 17.7 W
Structure of the heating Housing heating and separate heating of the optics glass
Warmup time Minimum 30 min at +24 VDC and an ambient temperature
of -35 °C
Minimum conductor cross section Conductor cross section of at least 0.75 mm² for the sup-
ply voltage supply line.
Note:
Wiring through of the voltage supply to multiple heating
devices is not permissible.
Standard, M12 ready-made cable not usable (insufficient
conductor cross section).
Ambient temperature (operation) -35 °C … +50 °C
Ambient temperature (storage) -35 °C … +70 °C
BCB BCB8
Grid 40 mm 30 mm
Standard height 47 mm 47 mm
Preferred heights 25 mm,
Special heights for lengths
greater than 150 m
25 mm, 30 mm, special
heights for lengths greater
than 150 m
Length 0 … 5 m, 0 … 10 m,
0 … 20 m, …, 0 … 150 m,
0 … 200 m;
Special lengths and special
codings for lengths greater
than 150 m (see chapter 14)
0 … 5 m, 0 … 10 m,
0 … 20 m, …, 0 … 150 m;
Special lengths and special
codings for lengths greater
than 150 m (see chapter 14)
Tape tolerance
1 mm per meter 1 mm per meter
NOTICE
Twin tapes on request
 Twin tapes can be ordered on request (see chapter 14).
Manufacturing process Filmsetting
Surface protection Polyester, matt
Base material Polyester film, affixed without silicone